View MLZ2012E4R7MT_6603211.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? all specifications are subject to change without notice. ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications. inductors for decoupling circuits multilayer/std ? magnetic shielded mlz series type: issue date: mlz1005w 1005[0402 inch]* mlz1608 1608[0603 inch] mlz2012 2012[0805 inch] * dimensions code jis[eia] may 2012
? all specifications are subject to change without notice. (1/10) 002-06 / 20120514 / e533_mlz inductors for decoupling circuits multilayer/std ? magnetic shielded mlz series mlz1005w the mlz series is a new line of multilayer choke coils for decou- pling with the industry?s best dc superimposition characteristics and lowest dc resistance ? . tdk has developed this coil using its proprietary ferrite material technique and dense electrodes. the mlz series exerts an excellent effect mainly on the decou- pling of power circuits. it also exerts an effect on audio lines because of its low dc resistance. the mlz1005 series is now available in addition to the mlz1608/ 2012 series. ? the mlz series was regarded as having the industry? s best dc superimposition characteristics and lowest dc resistance according to research conducted in september 2010. features ? mlz10005 series products have the best dc superimposition characteristics in the industry. ? magnetically sealed configuration allowing for high-density mounting. ? does not contain lead and is compatible with lead-free soldering. ? it is a product conforming to rohs directive. applications modules such as digital cellular phone and camera module, net- books, note pcs, dscs, dvcs, video games, portable memory audio devices, navigation systems, pnds, tvs, w-lans, solid state drives specifications recommended soldering condition reflow soldering product identification (1) series name (2) dimensions l ? w (3) management symbol (4) inductance (5) characteristic type (6) packaging style (7) tdk internal code packaging style and quantities handling and precautions ? before soldering, be sure to preheat components. the preheating temperature should be set so that the tempera- ture difference between the solder temperature and product temperature does not exceed 150c. ? after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. ? the inductance value may change due to magnetic saturation if the current exceeds the rated maximum. ? do not expose the inductors to stray magnetic fields. ? avoid static electricity discharge during handling. ? when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. conformity to rohs directive operating temperature range ?55 to +125c [including self-temperature rise] storage temperature range ?55 to +125c(after mount) natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230c 250 to 260c 180c 150c time(s) mlz 1005 m 1r0 w t (1) (2) (3) (4) (5) (6) (7) 1005 1.0 ? 0.5 ? 0.5mm r47 0.47 ? h 1r0 1.0 ? h w idc-up t taping [reel] packaging style quantity taping 10000 pieces/reel ? please contact our sales office when your application is considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
? all specifications are subject to change without notice. (2/10) 002-06 / 20120514 / e533_mlz shapes and dimensions/recommended pc board pattern electrical characteristics ? 1 current assumed when inductance ratio has decreased by 50% max.. ? 2 current assumed when temperature has risen to 20c max. (reference value). the maximum operating temperature at this time is 1 05c. ? test equipment inductance: ag-4294a+16034g typical electrical characteristics inductance vs. frequency characteristics inductance change vs. dc superposition characteristics impedance vs. frequency characteristics temperature characteristics classification part no. inductance (h) inductance tolerance te s t frequency l (mhz) te s t current l (ma) self-resonant frequency (mhz)typ. dc resistance ( ? )30% rated current ? 1 (ma) rated current ? 2 (ma) idc-up mlz1005mr47wt 0.47 20% 2 0.1 260 0.20 120 500 mlz1005mr68wt 0.68 20% 2 0.1 210 0.30 110 450 mlz1005m1r0wt 1.00 20% 2 0.1 170 0.35 100 450 mlz1005m1r5wt 1.50 20% 2 0.1 140 0.50 80 350 mlz1005m2r2wt 2.20 20% 2 0.1 120 0.55 60 350 1.0?.05 0.1min. 0.1min. 0.5?.05 0.5?.05 weight : 1.2mg 0.4 0.5 0.5 0.5 dimensions in mm 1 10 100 1000 frequency ( mhz ) inductance ( h ) 10 1 0.01 0.1 m2r2w m1r5w m1r0w mr68w mr47w e4991a+16192a 1 10 100 1000 dc current ( ma ) 10 1 0.1 inductance ( h ) m2r2w m1r5w m1r0w mr68w mr47w 10000 1000 100 1 10 1 10 100 1000 frequency ( mhz ) impedance ( ) m2r2w m1r5w m1r0w mr68w mr47w e4991a+16192a 0 200 400 600 800 1000 dc current ( ma ) temperature ( ?c ) 60 50 40 0 30 20 10 m1r5w m1r0w mr68w mr47w m2r2w
? all specifications are subject to change without notice. (3/10) 002-06 / 20120514 / e533_mlz packaging styles reel dimensions tape dimensions 1.0 ?180 2.0 2.0 0.5 ?13 0.2 ?21 0.8 ?60min. 14.4max. dimensions in mm 8.4 +2.0 ?0.0 8.0 0.3 3.5 0.05 1.75 0.1 4.0 0.1 2.0 0.05 2.0 0.05 1.5 +0.1 ?0.0 sprocket hole cavity 1.15 0.1 0.8max. 0.65 0.1 160min. taping 200min. 300min. drawing direction dimensions in mm
? all specifications are subject to change without notice. (4/10) 002-06 / 20120514 / e533_mlz inductors for decoupling circuits multilayer/std ? magnetic shielded mlz series mlz1608 the mlz series is a line of multilayer choke coils for decoupling power circuits. the mlz1608-w series, a line of the mlz series, has increased its dc superimposition characteristics by up to 225% ? compared with existing products through the use of tdk's proprietary ferrite material technology. also available is the mlz1608-l series. this series has lowered its resistance by up to 40% compared with existing products through the adoption of a new ferrite material and dense electrodes. this series includes the e3 series, which handles 1.0 to 10h, hence it is extremely useful in the power-supply design of low-voltage cir- cuits. features ? the w series (idc up type) is a line of products that have achieved the industry's best ? dc superimposition characteristics. ? according to research conducted in august 2010. ? the l series (low-resistance type) has lowered its resistance by up to 40% compared with existing products. ? the d series (high frequency type) is a line of decoupling coil products for high frequencies. it can handle higher noise frequencies. applications modules such as digital cellular phone and camera module, net- books, note pcs, dscs, dvcs, video games, portable memory audio devices, navigation systems, pnds, tvs, w-lans, solid state drives specifications recommended soldering condition reflow soldering product identification (1) series name (2) dimensions l ? w (3) management symbol (4) inductance (5) characteristic type (6) packaging style (7) tdk internal code packaging style and quantities handling and precautions ? before soldering, be sure to preheat components. the preheating temperature should be set so that the tempera- ture difference between the solder temperature and product temperature does not exceed 150c. ? after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. ? the inductance value may change due to magnetic saturation if the current exceeds the rated maximum. ? do not expose the inductors to stray magnetic fields. ? avoid static electricity discharge during handling. ? when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. conformity to rohs directive operating temperature range ?55 to +125c [including self-temperature rise] storage temperature range ?55 to +125c(after mount) natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230c 250 to 260c 180c 150c time(s) mlz 1608 a 1r0 w t (1) (2) (3) (4) (5) (6) (7) 1608 1.6 ? 0.8mm r10 0.1 ? h 1r0 1.0 ? h 100 10.0 ? h d high frequency type w idc-up type l low-resistance type t taping [reel] packaging style quantity taping 4000 pieces/reel ? please contact our sales office when your application is considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
? all specifications are subject to change without notice. (5/10) 002-06 / 20120514 / e533_mlz shapes and dimensions/recommended pc board pattern electrical characteristics ? 1 current assumed when inductance ratio has decreased by 50% max.. ? 2 current assumed when temperature has risen to 20c max. (reference value). the maximum operating temperature at this time is 1 05c. ? test equipment inductance: ag-4294a+16034g typical electrical characteristics inductance vs. frequency characteristics impedance vs. frequency characteristics classification part no. inductance (h) inductance tolerance te s t frequency l (mhz) te s t current l (ma) self-resonant frequency (mhz)typ. dc resistance ( ? )30% rated current ? 1 (ma) rated current ? 2 (ma) high frequency type mlz1608dr10dt 0.10 20% 25 1.0 600 0.14 700 850 mlz1608dr22dt 0.22 20% 25 1.0 400 0.27 550 600 mlz1608dr47dt 0.47 20% 25 1.0 260 0.42 400 500 idc-up type mlz1608a1r0wt 1.00 20% 10 1.0 170 0.15 190 600 mlz1608a2r2wt 2.20 20% 10 1.0 120 0.25 130 500 mlz1608m4r7wt 4.70 20% 2 0.1 80 0.50 120 350 mlz1608m100wt 10.0 20% 2 0.1 50 1.05 90 250 mlz1608m220wt 22.0 20% 2 0.1 38 2.40 55 150 low-resistance type mlz1608n1r0lt 1.00 20% 2 0.1 170 0.11 140 700 mlz1608n2r2lt 2.20 20% 2 0.1 120 0.18 110 500 mlz1608n4r7lt 4.70 20% 2 0.1 80 0.32 80 400 mlz1608n100lt 10.0 20% 2 0.1 50 0.60 60 300 1.6 0.15 0.3 0.2 0.3 0.2 0.8 0.15 0.8 0.15 weight : 4mg 0.8 0.6 0.6 0.8 dimensions in mm e4991a+16192a 0.01 0.1 1 10 1 10 100 1000 inductance ( h ) frequency ( mhz ) r47d r10d e4991a+16192a 0.01 0.1 1 100 10 1 10 100 1000 inductance ( h ) frequency ( mhz ) 100w 2r2w e4991a+16192a 0.01 0.1 1 100 10 1 10 100 1000 inductance ( h ) frequency ( mhz ) 100l 2r2l e4991a+16192a 1 10 100 1000 10000 impedance ( ) 1 10 100 1000 frequency ( mhz ) r47d r10d e4991a+16192a 1 10 100 1000 10000 impedance ( ) 1 10 100 1000 frequency ( mhz ) 100w 2r2w e4991a+16192a 1 10 100 1000 10000 impedance ( ) 1 10 100 1000 frequency ( mhz ) 100w 2r2w
? all specifications are subject to change without notice. (6/10) 002-06 / 20120514 / e533_mlz typical electrical characteristics inductance change vs. dc superposition characteristics temperature characteristics packaging styles reel dimensions tape dimensions 0.01 0.1 1 0.1 1 10 100 1000 inductance ( h ) dc current ( ma ) r47d r10d 0.1 1 100 10 0.1 1 10 100 1000 inductance ( h ) dc current ( ma ) 100w 2r2w 0.1 1 100 10 0.1 1 10 100 1000 inductance ( h ) dc current ( ma ) 100l 2r2l 0 200 400 600 800 1000 dc current ( ma ) temperature ( ?c ) 60 50 40 0 30 20 10 100w a2r2w 100l 2r2l r47d r10d 1.0 ?180 2.0 2.0 0.5 ?13 0.2 ?21 0.8 ?60min. 14.4max. dimensions in mm 8.4 +2.0 ?0.0 8.0 0.3 3.5 0.05 1.9 0.2 1.75 0.1 1.1max. 1.1 0.2 4.0 0.1 4.0 0.1 2.0 0.05 1.5 +0.1 ?0.0 sprocket hole cavity 160min. taping 200min. 300min. drawing direction dimensions in mm
? all specifications are subject to change without notice. 002-06 / 20120514 / e533_mlz (7/10) inductors for decoupling circuits multilayer/std ? magnetic shielded mlz series mlz2012 the mlz series is a line of multilayer choke coils for decoupling power circuits. the mlz2012-w series, a line of the mlz series, has increased its dc superimposition characteristics by up to 250% ? compared with existing products through the use of tdk's proprietary ferrite material technology. also available is the mlz2012-l series. this series has lowered its resistance by up to 50% compared with existing products through the adoption of a new ferrite material and dense electrodes. this series includes the e6 series, which handles 1.0 to 15h, hence it is extremely useful in the power-supply design of low-voltage cir- cuits. features ? the w series (idc up type) is a line of products that have achieved the industry's best ? dc superimposition characteristics. ? according to research conducted in august 2010. ? the l series (low-resistance type) has lowered its resistance by up to 50% compared with existing products. ? the d series (high frequency type) is a line of decoupling coil products for high frequencies. it can handle higher noise frequencies. ? with its wider inductance range (0.1 to 47h) and the addition of the e6 series, this series can satisfy a wide variety of requirements. applications modules such as digital cellular phone and camera module, net- books, note pcs, dscs, dvcs, video games, portable memory audio devices, navigation systems, pnds, tvs, w-lans, solid state drives specifications recommended soldering condition reflow soldering product identification (1) series name (2) dimensions l ? w (3) management symbol (4) inductance (5) characteristic type (6) packaging style (7) tdk internal code packaging style and quantities handling and precautions ? before soldering, be sure to preheat components. the preheating temperature should be set so that the tempera- ture difference between the solder temperature and product temperature does not exceed 150c. ? after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. ? the inductance value may change due to magnetic saturation if the current exceeds the rated maximum. ? do not expose the inductors to stray magnetic fields. ? avoid static electricity discharge during handling. ? when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. conformity to rohs directive operating temperature range ?55 to +125c [including self-temperature rise] storage temperature range ?55 to +125c(after mount) natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230c 250 to 260c 180c 150c time(s) mlz 2012 a 1r0 w t (1) (2) (3) (4) (5) (6) (7) 2012 2.0 ? 1.25mm r10 0.1 ? h 1r0 1.0 ? h 100 10.0 ? h d high frequency type w idc-up type l low-resistance type t taping [reel] packaging style thickness t(mm) quantity taping 0.85 4000 pieces/reel 1.25 2000 pieces/reel ? please contact our sales office when your application is considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
? all specifications are subject to change without notice. 002-06 / 20120514 / e533_mlz (8/10) shapes and dimensions/recommended pc board pattern electrical characteristics ? 1 current assumed when inductance ratio has decreased by 50% max.. ? 2 current assumed when temperature has risen to 20c max. (reference value). the maximum operating temperature at this time is 1 05c. ? test equipment inductance: ag4294a-16034g typical electrical characteristics inductance vs. frequency characteristics classification part no. inductance (h) inductance tolerance thickness (mm) te s t frequency l (mhz) te s t current l (ma) self-resonant frequency (mhz)typ. dc resistance ( ? )30% rated current ? 1 (ma) rated current ? 2 (ma) high frequency type mlz2012dr10dt 0.10 20% 0.85 25 1.0 500 0.07 1000 1150 mlz2012dr22dt 0.22 20% 0.85 25 1.0 330 0.13 800 900 mlz2012dr47dt 0.47 20% 1.25 25 1.0 230 0.18 550 700 idc-up type mlz2012a1r0wt 1.00 20% 0.85 10 1.0 160 0.10 280 900 mlz2012a1r5wt 1.50 20% 0.85 10 1.0 140 0.13 250 750 mlz2012a2r2wt 2.20 20% 0.85 10 1.0 120 0.15 210 650 mlz2012a3r3wt 3.30 20% 0.85 10 1.0 90 0.34 200 450 mlz2012m4r7wt 4.70 20% 0.85 2 0.1 70 0.30 180 500 mlz2012m6r8wt 6.80 20% 1.25 2 0.1 60 0.40 160 400 mlz2012m100wt 10.0 20% 1.25 2 0.1 50 0.47 150 350 mlz2012m150wt 15.0 20% 1.25 2 0.1 40 0.95 120 250 mlz2012m220wt 22.0 20% 1.25 2 0.1 35 2.00 60 220 mlz2012m330wt 33.0 20% 1.25 2 0.1 28 2.60 55 190 mlz2012m470wt 47.0 20% 1.25 2 0.1 20 3.70 50 170 low-resistance type mlz2012n1r0lt 1.00 20% 0.85 2 0.1 160 0.06 220 1150 mlz2012n1r5lt 1.50 20% 0.85 2 0.1 140 0.10 190 900 mlz2012n2r2lt 2.20 20% 0.85 2 0.1 120 0.12 170 800 mlz2012n3r3lt 3.30 20% 0.85 2 0.1 90 0.15 130 750 mlz2012n4r7lt 4.70 20% 0.85 2 0.1 70 0.18 130 600 mlz2012n6r8lt 6.80 20% 0.85 2 0.1 60 0.25 110 550 mlz2012n100lt 10.0 20% 1.25 2 0.1 50 0.30 110 500 mlz2012n150lt 15.0 20% 1.25 2 0.1 40 0.47 90 350 mlz2012n220lt 22.0 20% 1.25 2 0.1 40 0.67 70 300 mlz2012n101lt 100.0 20% 1.25 2 0.1 12 3.50 30 140 1.250.2 t 0.50.3 0.50.3 2.00.2 t ( thickness ) 0.85 0.2 1.25 0.2 weight ( mg ) 10 14 1.0 0.8 0.8 1.2 dimensions in mm 0.01 0.1 10 1 1 10 100 1000 inductance ( h ) frequency ( mhz ) r47 r10 e4991a+16192 0.01 0.1 1000 10 100 1 1 10 100 1000 inductance ( h ) frequency ( mhz ) 470w 100w 2r2w e4991a+16192 0.01 0.1 100 10 1 1 10 100 1000 inductance ( h ) frequency ( mhz ) 100l 2r2l 4r7l e4991a+16192
? all specifications are subject to change without notice. 002-06 / 20120514 / e533_mlz (9/10) typical electrical characteristics impedance vs. frequency characteristics inductance change vs. dc superposition characteristics temperature characteristics e4991a+16192 1 10 100 1000 10000 impedance ( ) 1 10 100 1000 frequency ( mhz ) r47 r10 e4991a+16192 10 100 1000 10000 100000 impedance ( ) 1 10 100 1000 frequency ( mhz ) 470w 100w 2r2w e4991a+16192 1 10 100 1000 10000 impedance ( ) 1 10 100 1000 frequency ( mhz ) 100l 2r2l 4r7l 0.01 0.1 1 0.1 1 10 100 1000 inductance ( h ) dc current ( ma ) r47 r10 0.1 1 100 10 0.1 1 10 100 1000 inductance ( h ) dc current ( ma ) 470w 100w 2r2w 0.1 1 10 100 1000 inductance ( h ) dc current ( ma ) 0.1 1 100 10 100l 2r2l 4r7l 0 0 200 400 600 800 1000 dc current ( ma ) temperature ( ?c ) 60 50 40 30 20 10 470w 100w 2r2w 100l 2r2l 4r7l r47d r10d
? all specifications are subject to change without notice. 002-06 / 20120514 / e533_mlz (10/10) packaging styles reel dimensions tape dimensions 1.0 ?180 2.0 2.0 0.5 ?13 0.2 ?21 0.8 ?60min. 14.4max. dimensions in mm 8.4 +2.0 ?0.0 8.0 0.3 3.5 0.05 1.75 0.1 1.1max. 4.0 0.1 4.0 0.1 2.0 0.05 1.5 +0.1 ?0.0 sprocket hole cavity 2.3 0.2 1.5 0.2 160min. taping 200min. 300min. drawing direction dimensions in mm t=0.85mm t=1.25mm 8.0 0.3 3.5 0.05 1.75 0.1 0.3max. 4.0 0.1 4.0 0.1 2.0 0.05 1.5 +0.1 ?0.0 sprocket hole 0.5min. cavity 2.3 0.2 1.5max. 1.5 0.2

▲Up To Search▲

Price & Availability of MLZ2012E4R7MT

	To Download MLZ2012E4R7MT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .